****     PARTLIST FOR  The Black Spot II - GPS Jammer with 7.2W EQP     ****
       
     All parts below are included in the KIT
            
                            


General parts
=================

1 pcs Factory made PCB

1 pcs PP3 Connector for 9V battery

1 pcs Antenna 46 mm

1 pcs Soldering lead
1 pcs Wick

1 pcs Instruction manual


RESISTORS
===============
   10  = R5, R6
   15  = R4
  100  = R7
   1k  = R1, R2
  20k  = Pot P1 (Make sure you mount it so it can be adjusted trough the hole in the PCB) 
 100k  = R3

(One extra part will be added for each value, in case you loose one on the floor)


CAPACITORS
=================
  1.5pF = C12
   27pF = C13 
   47pF = C14, C15, C16, C17, C17 
 100nF  = C3, C4, C5, C6, C7, C8, C9, C10, C11
 3.3uF  = C1, C2 (Orange line = positive) 

(One extra part will be added for each value, in case you loose one on the floor)


EMI FILTER
=================
F1, F2,  F3, F4, F5 = Ferrite Bead


Inductors
=================
  5nH = L1  
 15nH = L2 


VOLTAGE REGULATOR
=================
V1   = LM1117


CRYSTAL
=================
X1   = 16.800 MHz


SEMICONDUCTORS
=================
IC1 = PIC12F629 
IC2 = LMX1600
IC3 = PBL40307 
IC4 = SGA6589


D1  = SMV1251 (make sure you mount it in correct direction) 

D2  = LED  (make sure you mount it in correct direction)