****     PARTLIST FOR TRINITY Power Meter     ****
       
     All parts below are included in the KIT
            
                            


General parts
=================

1 pcs Factory made PCB


1 pcs 5 pin header 2.54mm pitch (Power)
1 pcs 4 pin header 2.54mm pitch (Serial)
1 pcs 2 pin header 2.54mm pitch (Gauge Meter)



1 pcs 28 pin IC socket for PIC16F870
1 pcs 24 pin IC socket for ADS1211

1 pcs PP3 Connector for 9V battery

1 pcd SMA connector

1 pcs Soldering lead
1 pcs Wick

1 pcs Instruction manual


RESISTORS
=================
   10  = R12, R13
  100  = R1
  162  = R2
  402  = R3, R7, R9
   1k  = R4, R5, R6, R8 
19.6k  = R10, R11

(One extra part will be added for each value, in case you loose one on the floor)


CAPACITORS
=================
   10pF = C26
   18pF = C7, C8 
   1nF  = C13, C14, C15  
 100nF  = C9, C10, C11, C12, C16, C17, C18, C19, C20, C21, C22, C23, C24 
0.33uF  = C1, C3, C25 (White line = positive) 
 4.7uF  = C4, C6 (White plus = positive) 
  47uF  = C2, C5 (White plus = positive)

(One extra part will be added for each value, in case you loose one on the floor)


EMI FILTER
=================
F1, F2, F3, F4, F5 = NFE61PT102E1H9L ferrite filters


VOLTAGE REGULATOR
=================
V1   = 78L05
V2   = 78L05
V3   = 78L05

CRYSTAL
=================
X1   = 4.9152 MHz
X2   = 8.0000 MHz


SEMICONDUCTORS
=================
IC1, IC2 = TLP181
IC3      = PIC16F870 programmed and tested
IC4      = ADS1211
IC5      = AD8313

D1       = LED 

1 pcs CP210x USB to TTL converter Module

1 m flat cable for USB to TTL converter