****     PARTLIST FOR ROBOT VOICE     ****
       
          All parts below are included in the KIT
            
                            


General parts
=================

1 pcs Factory made PCB

4 pcs buttons

3 pcs  3 pin header 2.54mm pitch (J2, P2, P3)

5 pcs  2 pin header 2.54mm pitch (Line in, Mic, J1, In, Out)

1 pcs  2 pin jumper (connected to J1)

1 pcs LED

1 pcs 18 pin IC socket for HT8950

1 pcs PP3 Connector for 9V battery (connected to -In+)

1 pcs Speaker (connected to -Out+)

1 pcs Microphone

1 pcs Soldering lead

1 pcs Wick

1 pcs Instruction manual


RESISTORS
=================
  10  = R4
 402  = R2 
  1k  = R5
3.3k  = R3
 10k  = R6, R7, R8
 20k  = R10 
100k  = R9 
237k  = R1 

(One extra part will be added for each smd value, in case you loose one on the floor)


CAPACITORS
=================
 15nF = C14
100nF = C1, C3, C6, C7, C11, C12, C13, C15, C16, C17
 10uF = C2, C4, C5, C8 (Orange line = plus) 
220uF = C9, C10 (minus is marked on the capacitors)
(One extra part will be added for each smd value, in case you loose one on the floor)


VOLTAGE REGULATOR
=================
V1   = 78L33


POTENTIOMETERS
=================
P1     = 20k (smd)
P2, P3 = 20k
P4, P5 = 250k


SEMICONDUCTORS
=================
IC1  = HT8950
IC2  = LM386 (smd)